Security Link SL150 Guía para resolver problemas descargar pdf (Pagina 72)

SL150 Installation and Setup Guide

15–4

✱

38 CONFIRMATION OF ARMING DING 0

0 = no ding

1 = confirmation ding after arming system

2 = confirmation ding after arming from RF button type units or RF keypad

only (ding occurs when the system receives the RF transmission)

Confirmation of arming is ½-second external sounder “ding” when closing

report is sent, or at the end of Exit Delay.

✱

39 POWER UP IN PREVIOUS STATE 1

0 = always power up in a disarmed state

1 = assume the system status prior to power down

When the system powers up armed, an alarm will occur 1 minute after

arming if a zone is faulted.

Note: If the previous state was armed AWAY or STAY, the system will not

respond to sensor changes for 1 minute, which allows time for sensors such as

PIRs to stabilize. This means that if a zone is faulted during that

1-minute period, the system will not detect the fault and would power up into

the armed ON AWAY or STAY original state.

UL installations: Must be 1 (power up in previous state)

DIALER

PROGRAMMING

(

✱

40–

✱

50)

✱

40 PABX ACCESS CODE

(See box at left)

| | | | |

Enter up to 6 digits if PABX is needed to access an outside line. If fewer than

6 digits need to be entered, exit by pressing [

✱

]

and next field number

(e.g., 41). To clear entries from field, press

✱

41 PRIMARY PHONE NO.

(See box at left)

| | | | | | | | | | | | | | | | | | |

Enter up to 20 digits. If you enter fewer than 20 digits, exit by pressing

[

✱

]

and next field number (e.g., 42). To clear entries from field, press

✱

NOTE: Backup reporting (in which 8 calls are made to the secondary phone

number if no kissoff is received after 8 attempts to the primary number) is

automatic only if there is a secondary phone number (field

✱

42).

Fields

✱

40,

✱

41,

✱

42:

Enter up to the number

of digits shown. Do not

fill unused spaces.

Enter 0–9,

[#] + 11 for

✱

[#] + 12 for #

[#] + 13 for a pause

(2 seconds)

✱

42 SECONDARY PHONE NO.

(See box at left)

| | | | | | | | | | | | | | | | | | |

Enter up to 20 digits. If you enter fewer than 20 digits, exit by pressing

[

✱

]

and next field number (e.g., 43). To clear entries from field, press

✱

See backup reporting note for field

✱

41. If using the pager feature, enter the

pager phone number here.

✱

43 PRIMARY SUBSCRIBER ACCOUNT NO. See box below. F| F| F| F

✱

44 SECONDARY SUBSCRIBER ACCOUNT NO. See box below. F| F| F| F

For Fields

✱

43 and

✱

44:

Enter digits 0–9; [#] +11 = B; [#] +12 = C; [#] +13 = D; [#] +14 = E;

or [#] +15 = F.

If only 3 digits used, exit by pressing [

✱

] and key next field. To clear entries from field, press

✱

See separate Programming Form for examples of account number entries.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 143 144

Comentarios a estos manuales

Sin comentarios

Security Link SL150 Guía para resolver problemas Pagina 72

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Security Link SL150