
SL150 Installation and Setup Guide
15–6
✱
53 SESCOA/RADIONICS SELECT 0
0 = Radionics (0–9, B–F reporting)
1 = SESCOA (0–9 only reporting)
Select 0 for all other formats.
✱
54 DYNAMIC SIGNALING DELAY (DSD) See chart below 0
This field enables you to select the time the panel should wait for
acknowledgment from the first reporting destination before it attempts to
send a message to the second destination. Delays can be selected from 0 to
225 seconds, in 15-second increments.
This delay is per message.
Also see field
✱
55.
0–15 times a 15-second delay. e.g., 1 = 15 seconds, 2 = 30 seconds, etc.
Default is “0” (no delay). UL installations: Must be “0” (no delay).
✱
55 DYNAMIC SIGNALING PRIORITY (DSP) See chart below 0
This field enables you to select the initial reporting destination for messages,
Primary Dialer or Long Range Radio (when used).
0 = Primary dialer first; 1 = Long Range Radio (LRR) first.
Default is “0” (primary dialer)
The following chart will provide a concise explanation of how the Dynamic
Signaling feature functions.
If Priority (
✱
55) is: And message is: Then:
Primary Phone No. Acknowledged before delay Message is removed from queue
(“0” entered) expires and no message is sent to LRR.
Not acknowledged before Message is sent to both the
delay expires Primary Phone No. and LRR.
Long Range Radio Acknowledged before delay Message is removed from queue
(“1” entered) expires and no message is sent to the
Primary dialer.
Not acknowledged before Message is sent to both the
delay expires Primary Phone No. and LRR.
Note:
You must enable field
✱
29,
OUTPUT TO LONG RANGE RADIO
, if this feature is
to function.
✱
56 ZONE PROGRAMMING MODE
This is an Interactive
Menu mode used for programming zone attributes,
report codes, and enrolling transmitters. Refer to
Section 16: Zone
Programming
for procedure.
✱
58 EXPERT PROGRAMMING MODE
This is an Interactive
Menu mode used for fast programming of zone
attributes, enrolling transmitters, and duplicating wireless keys. Refer to
Section 16: Zone Programming
for procedure.
Comentarios a estos manuales